home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1996 November
/
Chip 11-96.iso
/
treiber
/
drucker
/
lexmark
/
4039_xxx
/
win3x
/
ps1
/
4039ps1.exe
/
HG3039PS.ZIP
/
README.1ST
< prev
Wrap
Text File
|
1993-04-21
|
4KB
|
121 lines
VERSION 1.0
I. IBM 4039 LaserPrinter PostScript Driver for Harvard Graphics 3.0.
-----------------------------------------------------------------
STOP!!! Read the following paragraph before proceeding!
In order for these drivers to be recognized you must have Harvard
Graphics Version 3.05 (or later) software update installed. To
determine the version of your software, at the Main Menu press
Ctrl V (control button and letter v). If you need the update, it
is available from Harvard Graphics by calling their customer service
at (408) 988-7518.
II. VERSION HISTORY:
Initial release of this driver.
III. CONTENTS:
In addition to this README.1ST file you should also have the
following file:
Filename Size Date Description
------------ ------- ---------- ----------------------------
PS35NA.PN3 131683 03/17/93 Driver File
IV. INSTALLATION INSTRUCTIONS:
Assuming the new driver is on a diskette and you are inserting it in
the "A" drive the command to install the driver will be as follows:
A:\> COPY PS35NA.PN3 C:\HG3\DRIVER
Note: If you have Harvard Graphics 3.0 installed in a different drive
or directory, alter the Copy command accordingly.
Press Enter and the driver will be copied into the Harvard Graphics
Driver sub-directory.
The driver may now be selected:
* Start Harvard Graphics 3.0
* Main Menu, select "Setup 8".
* Select Printer 1 or 2.
* Move cursor to "Printer Type", press F3.
* Move cursor to IBM 4039 LaserPrinter PS, press Enter.
- Output Port, Paper Size, Quality, etc. may also be set
at this time.
* Use Esc button to return to the Main Menu.
The driver is now installed.
V. SPECIAL INSTRUCTIONS:
Instructions for IBM LaserPrinter 4039 Series Driver Set-up.
A. Print Quality/Resolution Settings:
The Harvard Graphics 3.0 software has three print quality
settings (Modes) in the "Output to Printer" Menu, sub-section
"Quality" as follows:
1. Draft Mode 2. Medium Mode 3. High Mode
The IBM 4039 LaserPrinter PS series driver has two print
resolution settings as follows:
1. 300 dpi 2. 600 dpi
The two equate as follows:
Software Selection: results in Printer Setting:
------------------- ----------------
1. Draft Mode 1. 300 dpi
2. Medium Mode 2. 300 dpi
3. High Mode 3. 600 dpi
B. Special Options (F8) for the IBM 4039 include:
"Use Upper Tray"
"Use Lower Tray"
"Use Manual Feed Tray"
"Use Tray Matching Paper Size"
If you select the "Use Tray Matching Paper Size" Option, the
printer will use the tray that contains the paper size selected
for the current chart. If this paper size is not contained in
the printer, the printer front panel will prompt you for the
paper.
VI. DRIVER SUPPORT:
For Software questions call Software Publications (Harvard Graphics)
at (408) 988-4005.
For Printer questions call Lexmark International at (606) 232-3000.